Water surface tension

WATER SURFACE TENSION REDUCTION BY PHYSICAL MAGNETIC TECHNOLOGY.

PREVIOUS An information by AQUA-CORRECT^® watertechnic NEXT

The unique AQUA-CORRECT^® technic: A reduction of the water surface tension by 10%.

The water surface tension measuring princip. The tensiometer.

Measurement of the water surface tension:

A platin ring is placed on the water surface and withdrawn again. At the very moment that the water is slipping from the ring, the drawing force F is measured in Newton.

Normal drinking water has a F value of approximately:

so = 74,0.10 ^-3 N/m

This value is generally measured for almost all sub-soil water worldwide.

The above measuring principle used to determine the water surface tension is the most accurate known to date and the reduction value that is stated for the AQUA-CORRECT^® conditioners in our technical dates is referring to this method.

All AQUA-CORRECT^® capacity types obtain this result just after the water in the internal free flow has once passed through the physical magnetic fields. Repeated circulation through the AQUA-CORRECT^® conditioner indicate water reduction values between 12-18%; an advantage frequently used in industrial processes, to reduce chemical additives by up to 50% as well as to increase sedimentation and optimize the production in general.

NEXT Important information NEXT

The technical requirement for the function of all magnetic water conditioners:

The reduction of the binding forces in the water itself by 8-10% is necessary to obtain a satisfactory result with any magnetic water treatment. Only under this condition of a reducing the water surface tension will a magnetic conditioner also have the physical ability to dissolve other molecule binding forces in the, like calcium carbonates and have the benefit to avoide the lime scale disposals in water supply systems!

Only few magnetic products prove a reduction of the water surface tension. Mostly the so called "magnetic" treatment products generate turbulence in reality only the free and aggressive CO2. The causes doubtful results and hve even confused scientists about the function princip of magnetic water treatments. The recommendation to investors in a magnet treatment: Require a confirmed minimum 8-10% water surface reduction before buying.

AQUA-CORRECT^® water conditioning guarantees a 10% reduction!

AQUA-CORRECT^® conditioners was performance tested by the major European water research institutes. It holds European ISO 9000 certification. The test approvals of performance and quality include approved investigations at Technical Institutes: TÜV Technological Institute, Germany, Technological Institute and The University Institute of Physics in Denmark as well as other reconnized research institutes.

AQUA-CORRECT^®conditioners are produced in acid durable steel A 316Ti and have an internal free, smooth liquid flow without turbulence and pressure loss. The treatment is particularly developed for use in industrial plants, water based solutions and is recommended for all residential drinking water installations to protect against lime scale deposits and corrosion.

Material Quality: V4A 1.4574 (DIN) = 316Ti (EUA/USA), 2350 (Sweden), 320 S17 (GB)

Related subject web page: The properties of water with a reduced surface tension

A UNIQUE CHEMICAL FREE TECHNIC, SAFE FUNCTION AND NO PRESSURE LOSS. A LOOK INSIDE THE AQUA CORRECT: GUARANTEE FOR A FULL, FREE AND SMOOTH LIQUID FLOW. FUNCTION TEST REPORTS BY SCIENTIFIC INSTITUTES. MATERIAL: ALL BEST QUALITY ACID-DURABLE STAINLESS STEEL. FULL EXTERNAL RADIATION SHIELD PROTECTION.

The special AQUA CORRECT system physical feature: Internal free flow - No turbulence - No aggressive CO₂

NIELSEN TECHNICAL TRADING ApS - P.O.Box 10
DK-4621 Gadstrup - Denmark
nielsen@nielsen.dk

Design: www.wwwService.dk - Latest update 08-01 - Copyrights: NTT Watertechnic Consults & Co., Roskilde, Denmark.